Transparent coating with flexibility 3822

High conductivity for flexible surfaces

Transparent coating with flexibility is a polyurethane graphene hybrid paint. It is suitable for applications where a highly conductive surface is required on a flexible surface. For example on:

  • PVC
  • P.U. elastomer
  • Fabrics
  • Rubber variants
  • Leather
  • Etc.

Technical data

Surface Resistivity   <107 ohms/Sq
Colour   Transparent
Flash Point   4 °C
Overcoating   Possible at any stage of dry
Film Thickness Wet 50 micron
Dry 10 - 15 micron
Elongation   Approximately 500%
Finish   Low gloss
Coverage   Approx. 10 sq.m/litre. (dependent on substrate)
Storage   12 months in original sealed containers
Maximum VOC Content   0.8 kgs/ltr


Typical applications include the removal of static electricity from electronic components in sensitive areas, such as touch screen monitors and flexible control panels in hospitals, as well as ATEX processing environments such as oil rigs etc. The 3822 transparant coating is generally applied directly to a clean and grease free substrate.

Thinners may attack some plastics, try before applying. The paint is thinned with approximately 15-30% thinner for spraying or 10% thinner for brushing.

The 3822 is an air drying coating that is touch dry in approximately 5 minutes at 20 °C, hard dry in 20 minutes, with full properties in around 1 hour.


For this product there are no free samples available


To get a quotation for Transparent coating with flexibility within 24 hours fill in the form below.

* Note: The red blocks are required