Oriented wire shield 5711 - 5722
Silicone sheet material with oriented wires for EMI shielding and IP sealing. Can be cut into complicated shapes by CNC knife cutting, laser cutting and/or water jet cutting, or die-cut.
Oriented wire shield 5711 - 5722 is a composite gasket material consisting of a large number of small wires embedded and bonded in solid or sponge silicone, or fluorosilicone elastomer for oil resistance.
The wires provide excellent conductivity to establish EMI/RFI shielding.
The material is used in military, industrial and commercial products requiring EMI suppression, grounding, or static discharge. It is very suitable for applications where an environmental or pressure seal is required.
The sponge version is used in cases where the joint is very uneven, or if lower closure forces or greater compressibility are required.
We produce sheets of 150 x 900mm, from which we can then cut gaskets without interruptions. Bigger gaskets can be welded/joined together in order to prevent waste of material.
Custom compositions are available on request, simply by sending a drawing with the desired dimensions to our email address firstname.lastname@example.org.
- Temperatures up to 220 °C
- High shielding performance
- Water sealing up to 10 meters
- Pressure resistant
- Salt spray/chemical resistant
- Fluorosilicone rubber for fuel/oil resistance
- Supplied as sheets, strips or die-cuts
0.81, 1.13, 1.38, 1.57, 2.40, 3.18, 3.96, 4.78, 6.35 mm.
Other thicknesses on request.
Oriented wire shield can be CNC cut according to your drawing into any desired shape and size
Oriented wire shield can be supplied on a roll of 900 mm length
Oriented wire shield can be supplied with various types of metal wires in order to prevent galvanic corrosion
Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
|Solid silicone with monel wire||5711|
|Solid silicone with aluminium wire||5712|
|Solid fluorosilicone with monel wire||5713|
|Sponge silicone with monel wire||5721|
|Sponge silicone with aluminium wire||5722|
|Material||Solid silicone with monel wire||Solid silicone with aluminium||Solid fluorosilicone with monel wire||Sponge silicone with monel wire||Sponge silicone with aluminium wire|
|Wire count/ sq. inch||900||900||900||900||900|
|Closing force (PSI)||25-100||25-100||25-100||5-50||5-50|
|Elastomer||Silicone or fluorosilicone|
|Conductive filler||Monel wire, aluminium wire|
|Oil resistance||Fluorosilicone type only|
|Fuel resistance||Fluorosilicone type only|
Conductive adhesive (conductive PSA)
|Adhesive strength||G/25mm||850||ASTM D 3330|
|Conductive PSA||-||Acrylic + Ni||-|